BSOD when I insert USB device

[Ramon Alvarez]

Hello there, this is my first time here and I'd be very thankful if you guys could help me whith this issue. I'm running windows 10 (not too happy about it), from some time I've been experiencing BSOD's when I connect USB devices (flash drive, mouse, etc.) sometimes the OS crashes and sometimes don't, when it does happens I get a BSOD and I have to reset the computer. This is what the dump file reads. Thanks in advance:

KERNEL_SECURITY_CHECK_FAILURE (139)
A kernel component has corrupted a critical data structure. The corruption
could potentially allow a malicious user to gain control of this machine.
Arguments:
Arg1: 0000000000000003, A LIST_ENTRY has been corrupted (i.e. double remove).
Arg2: ffffb680edb2a360, Address of the trap frame for the exception that caused the bugcheck
Arg3: ffffb680edb2a2b8, Address of the exception record for the exception that caused the bugcheck
Arg4: 0000000000000000, Reserved

Debugging Details:
------------------

***** Debugger could not find nt in module list, module list might be corrupt, error 0x80070057.


CUSTOMER_CRASH_COUNT: 1

DEFAULT_BUCKET_ID: WIN8_DRIVER_FAULT

BUGCHECK_STR: 0x139

CURRENT_IRQL: 0

LAST_CONTROL_TRANSFER: from fffff801ddb63929 to fffff801ddb587c0

STACK_TEXT:
ffffb680`edb2a038 fffff801`ddb63929 : 00000000`00000139 00000000`00000003 ffffb680`edb2a360 ffffb680`edb2a2b8 : 0xfffff801`ddb587c0
ffffb680`edb2a040 00000000`00000139 : 00000000`00000003 ffffb680`edb2a360 ffffb680`edb2a2b8 00000000`00000000 : 0xfffff801`ddb63929
ffffb680`edb2a048 00000000`00000003 : ffffb680`edb2a360 ffffb680`edb2a2b8 00000000`00000000 00000000`00000000 : 0x139
ffffb680`edb2a050 ffffb680`edb2a360 : ffffb680`edb2a2b8 00000000`00000000 00000000`00000000 00000000`00000000 : 0x3
ffffb680`edb2a058 ffffb680`edb2a2b8 : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : 0xffffb680`edb2a360
ffffb680`edb2a060 00000000`00000000 : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : 0xffffb680`edb2a2b8


STACK_COMMAND: kb

SYMBOL_NAME: ANALYSIS_INCONCLUSIVE

FOLLOWUP_NAME: MachineOwner

MODULE_NAME: Unknown_Module

IMAGE_NAME: Unknown_Image

DEBUG_FLR_IMAGE_TIMESTAMP: 0

BUCKET_ID: CORRUPT_MODULELIST

Followup: MachineOwner

 

[Trouble]

3 A LIST_ENTRY was corrupted (for example, a double remove). For more information, see the following Cause section.
SOURCE: https://msdn.microsoft.com/en-us/library/windows/hardware/jj569891(v=vs.85).aspx

Good luck. The last time this happened to me was on a laptop and it ended up being a bad solder joint on the motherboard for the USB ports on the left side of the laptop (sometimes it would crash to a BSOD, sometimes it would just crash and reboot, sometimes it would crash and shutdown, other times it would work perfectly fine.
Found after much chasing of drivers and a complete clean install of Windows.